The Openbox S9 is a high definition FTA satellite receiver that supports both DVB-S and DVB-S2 protocols along with both QPSK and 8PSK modulations.

It features a quick and accurate hardware-driven Blind Scan and AC3 audio decoding to the analog audio output jacks.  The Openbox S9 HD is also PVR ready to record your favourite programs or for time-shifting when an external hard drive is connected to the unit (not included).

Power supply is compatible with either American or European voltage standards.

SPECIFICATIONS:
- 250 MHz IBM PowerPC Processor (350 Mips)
- 2 status LED lights
- Linux Operating System
- Full automatic service scan
- Supports direct bouquet-lists (indirect unlimited)
- Supports DiSEqC 1.0, 1.1 and 1.2
- 1 x Smartcard-Reader
- 5000 TV or Radio channel capacity
- S/PDIF interface for digital bit stream out (AC-3 / DTS)
- MPEG 2 & MPEG 4 Hardware decoding with 4.2.0 video
- Channel-change time < 1 second
- Fully adaptable OSD in many languages (skin-support)
- 100Mbit full duplex Ethernet Interface
- Supports EPG (electronic program guide)
- 1 x Scart-interfaces (fully controlled by software)

Video decoder:
Video Compression MPEG-2 and MPEG-4 compatible
Video Standard PAL and NTSC
Video Formats 4:3 / 16:9
Letterbox percolating for 4:3 TV-Device 
Audio decoder: MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable

Ethernet:
100 MBit compatible, bi-directional interface
Function Update of Firmware and Preprogramming

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Serial Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming

Power consumption:
< 10W / 12V

Input voltage:
DC12V,alternating current +/- 15%

External power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A

Others:
Ambient Temperature +15°C...+35°C
Humidity < 80%